Elemental Dragon HueForge (Lava and Ice)
Print Profile(4)
Bill of Materials
Description
Elemental Dragon HueForge (Lava or Ice)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.08mm
Swap Instructions:
Start with Black
At layer #15 (1.2mm) swap to Red/Blue
At layer #20 (1.6mm) swap to Orange/Cyan
At layer #25 (2mm) swap to Yellow/White for the rest.
Attention!!! If you print the big model on the X1/X1C, you must remove the flow calibration lines.
____________________________________________________
HueForge Elemental Dragon (Lava or Ice)
Print with 100% infill with a layer height of 0.08 mm with a base layer of 0.08 mm
Swap Instructions:
Start with Black
At layer #15 (1.2 mm) swap to Red/Blue
At layer #20 (1.6 mm) swap to Orange/Cyan
At layer #25 (2 mm) swap to Yellow/White for the rest.
Attention!! If you print the large model on the X1/X1C, remove the flow calibration lines.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)