3.5" HDD adapter for two 2.5" HDD
Copyright Claim
3.5" HDD adapter for two 2.5" HDD
Boost
8
25
6
Print Profile(2)
0.2mm layer, 3 walls, 15% infill
Designer
2.4 h
1 plate
0.2mm layer, 6 walls, 25% infill
2.7 h
1 plate
Open in Bambu Studio
Boost
8
25
6
0
48
32
Released
Description
Summary
This adapter allows you to mount two 7mm slim 2.5" HDD or SSD drives in a 3.5" Slot.
The adapter has mounting points on the top and sides with the same spacing as 3.5" drives have.
Also there are holes with 30mm spacing as floppy disk drives use them.
The holes should fit for M3 Screws, to be screwed directly into the plastic.
For the 2.5" Drives you need four M3x12mm Allen screws.
Have fun.
Comment & Rating (6)
All
Print Profile
0.2mm layer, 3 walls, 15% infill
Worked like a charm, printed in cheapo PETG, and everything went great.
(Edited)
1
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
make sure the 2.5 drive isn't the thick ones. mine was the slim ones so it fit with no problems
(Edited)The designer has replied
1
Reply
yes, it's designed for the newer 7mm 2.5" drives, the older 9mm wont fit.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Really nice that you can put two disks in the same space as one big 3.5 HDD!
1
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld