Rugged Box (Mini)
Remixed by
Copyright Claim
Rugged Box (Mini)
Remixed by
Boost
11
22
3
Print Profile(2)
0.2mm layer, 4 walls, 40% infill, 1 wall for top & bottom
Designer
1.9 h
2 plates
All printers, 0.2mm layer, 4 walls, 40% infill
2 h
2 plates
Open in Bambu Studio
Boost
11
22
3
0
36
50
Released
Description
Mini version (remix) of Rugged Box (Parametric) by Whity using single hinge.
BOM (bill of materials)
- Mechanical parts: M3x30 SHCS/DIN 912 Bolts (Source: INT) x 3
- Printed Parts: Bottom, lid, latch, seal x 4
Print guidelines
Here are print guidelines for you to follow in order to have decent success with printing parts:
| 3D PRINTING PROCESS | Fused Deposition Modeling (FDM) |
| INFILL TYPE | Grid, Gyroid, Honeycomb, Triangle or Cubic |
| MATERIAL | PLA, PETG, ASA, ASA-CF, ABS, ABS+, ABS-CF |
| INFILL PERCENTAGE | 40% |
| LAYER HEIGHT | Recommended: 0.2mm |
| WALL COUNT | Recommended: 4 |
| SOLID TOP/BOTTOM LAYERS | Recommended: 5 |
| EXTRUSION WIDTH | Forced 0.4mm |
Assembly instructions
Tighten screws until you hear plastic cracking, then ½ turn back. Then, re-print and repeat until succeed.
(Just in case — this is for fun not an actual advice.)
Comment & Rating (3)
All
Print Profile
0.2mm layer, 4 walls, 40% infill, 1 wall for top & bottom
0
Reply
Print Profile
0.2mm layer, 4 walls, 40% infill, 1 wall for top & bottom
0
Reply
Print Profile
0.2mm layer, 4 walls, 40% infill, 1 wall for top & bottom
0
Reply
No more
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld