carp fish
Print Profile(1)
Description
BuNtSt@ PrInTs
A carp jumping out the water.
Project: carp fish 1.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 3.04mm and the Actual Thickness is 2.32mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.6
#545454 PLA BambuLab Basic Dark Gray Transmission Distance: 2.2
#8e9089 PLA BambuLab Basic Gray Transmission Distance: 5
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 4.8
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Dark Gray
At layer #16 (1.36mm) swap to Gray
At layer #23 (1.92mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)