Spool holder
Copyright Claim
Spool holder
Boost
22
40
22
Print Profile(1)
0.28mm layer, 3 walls, 20% infill
2 h
1 plate
Open in Bambu Studio
Boost
22
40
22
0
91
66
Released
Description
Short filament spoolholder. Fits for 1kg filament spools. Printed from PLA
Material: PLA, PET-G, ABS, ASA etc.
Infill: 50% at least recommended
Layer high: 0,2 recomended
Comment & Rating (22)
All
Print Profile
0.28mm layer, 3 walls, 20% infill
seems to have come out very well in polylite ABS
1
Reply
Print Profile
0.28mm layer, 3 walls, 20% infill
good
1
Reply
Print Profile
0.28mm layer, 3 walls, 20% infill
Perfect , Looks Great
2
Reply
Thank you.
0
Reply
Came out great and have it screwed into the bottom of a shelf above a p1s. Only issue I noticed is as the Bambu filament spool turns to feed filament into the machine the spool gradually slides down to the tip, but the spool never falls off or interferes with feeding. Only suggestion would be maybe a thicker blocker at the end or some kind of ribbed texture on the holder to help keep the spool in place?
The designer has replied
1
Reply
Thank you for sharing and comment.
0
Reply
Print Profile
0.28mm layer, 3 walls, 20% infill
Funktioniert sehr gut
1
Reply
Print Profile
0.28mm layer, 3 walls, 20% infill
works great
1
Reply
Print Profile
0.28mm layer, 3 walls, 20% infill
The print was good :-)
1
Reply
Print Profile
0.28mm layer, 3 walls, 20% infill
prints good nicee for under my desk
0
Reply
Print Profile
0.28mm layer, 3 walls, 20% infill
1
Reply
Print Profile
0.28mm layer, 3 walls, 20% infill
1
Reply
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld