Super Mario Hueforge

If you like my models and want to support me, you can drop a one-time tip on PayPal, or you can purchase filaments through my links. Every bit of support keeps me motivated to make more awesome stuff. Thanks a lot! 

https://www.paypal.com/ncp/payment/7WU9PZ7AA2TTA

Demon Slayer series: Demon Slayer Hueforge | Collection - MakerWorld: Download Free 3D Models

One Piece series: OnePiece_Hueforge | Collection - MakerWorld: Download Free 3D Models

Dan Da Dan series: https://makerworld.com/en/collections/7165703-dandadan_hueforge

Marvel series: Marvel_Hueforge | Collection - MakerWorld: Download Free 3D Models

Animal series: Animal_Hueforge | Collection - MakerWorld: Download Free 3D Models

Super Mario, my favorite game character when I was a kid!

Print Instruction:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

Filaments Used:
    #000000 PLA Black  Transmission Distance: 0.1
    #c00d1e PLA Basic Red  Transmission Distance: 4
    #fce300 PLA Basic Yellow  Transmission Distance: 6
    #ffffff PLA Basic Jade White  Transmission Distance: 5
    #0086d6 PLA Basic Cyan  Transmission Distance: 2.4
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Red
    At layer #11 (0.96mm) swap to Yellow
    At layer #13 (1.12mm) swap to Jade White
    At layer #18 (1.52mm) swap to Cyan
    At layer #21 (1.76mm) swap to Jade White for the rest.

For only one AMS,
Start with 4 colors as follows:
Slot1: Black
Slot2: Red
Slot3: Yellow
Slot4: White
Pause was set at Layer #7 in the print file to allow color swap:
Slot1: Black --> Cyan
 

******************************************************************************************

******************************************************************************************