CYBERTRUCK- XS: Print-In-Place
Copyright Claim
CYBERTRUCK- XS: Print-In-Place
Boost
23
33
11
Print Profile(1)
![[Mini-Friendly]: 0.16mm layer, 3 walls, 10% infill](https://makerworld.bblmw.com/makerworld/model/US84942bf236fb30/46301663/instance/2024-01-31_97c92086a79e6.jpg?image_process=resize,w_100/format,webp)
[Mini-Friendly]: 0.16mm layer, 3 walls, 10% infill
1.1 h
1 plate
Boost
23
33
11
2
87
74
Released
Description
Introducing: CYBERTRUCK- XS: Print-In-Place!
- A miniature version of the ever-popular Tesla CYBERTRUCK!
- Fully Print-In-Place, No assembly required!
- Add extra color with multi-material printing
- Designed in Fusion 360 as a learning project
Printing:
- Designed to be printed on the side, so the rims are parallel/flat to the build plate
- Some overhangs can be somewhat high, so print with that in mind (you shouldn't need support)
- Designed with a .4mm nozzle, so other sizes may not work as intended
- Printed with a brim
- 10% gyroid infill, 3 walls
Post-Processing:
- Remove brim, clean messy overhangs (if you have any)
- Wheels should come unstuck with a slight push from one side
Design Iterations
Comment & Rating (11)
All
Print Profile
[Mini-Friendly]: 0.16mm layer, 3 walls, 10% infill
Incredible quality print not that accurate compared to the real thing I’ve seen the real thing about seven times and it does not look quite like this, but it was still an incredible print with incredible quality, and there were no issues when printing whatsoever.
0
Reply
Print Profile
[Mini-Friendly]: 0.16mm layer, 3 walls, 10% infill
after canceling my cyber truck order,. I guess this is as close as I’ll get to ever owning one.
0
Reply
Print Profile
[Mini-Friendly]: 0.16mm layer, 3 walls, 10% infill
excellent
0
Reply
Print Profile
[Mini-Friendly]: 0.16mm layer, 3 walls, 10% infill
Very nice design. Looks like the original. I haven't printed such a beautiful model of it yet. The wheels are directly moveable 💪. Thank you very much for the model
0
Reply
Print Profile
[Mini-Friendly]: 0.16mm layer, 3 walls, 10% infill
good
0
Reply
Print Profile
[Mini-Friendly]: 0.16mm layer, 3 walls, 10% infill
worked good
0
Reply
Print Profile
[Mini-Friendly]: 0.16mm layer, 3 walls, 10% infill
My nephew loved this!
0
Reply
Print Profile
[Mini-Friendly]: 0.16mm layer, 3 walls, 10% infill
1
Reply
Print Profile
[Mini-Friendly]: 0.16mm layer, 3 walls, 10% infill
0
Reply
Print Profile
[Mini-Friendly]: 0.16mm layer, 3 walls, 10% infill
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld