This 3D printed piece features Hogwarts Castle from the Harry Potter series, set against a Van Gogh-inspired starry sky, in a six-color Hueforge technique. Sized at 230 x 184 mm, it was printed using a single AMS for color transitions.

Additionally, profiles for dual AMS systems and a manual filament swap option with pauses are available, accommodating various printing preferences and setups.

Technical Print Details:

• Print at 100% infill
• Layer height: 0.08mm, with an initial base layer of 0.16mm
• Print dimensions: 230 x 184 mm

Filaments Used:

• PLA BambuLab Basic Black, Transmission Distance: 0.6
• PLA BambuLab Basic Blue, Transmission Distance: 4
• PLA BambuLab Basic Cyan, Transmission Distance: 2
• PLA BambuLab Basic Orange, Transmission Distance: 3
• PLA BambuLab Basic Yellow, Transmission Distance: 4
• PLA BambuLab Basic Jade White, Transmission Distance: 5

AMS Swap Instructions:

1. Start with Black.
2. At layer #3 (0.32mm), swap to Blue.
3. At layer #8 (0.72mm), switch to Cyan.
4. At layer #13 (1.12mm), exchange to Orange.
5. At layer #16 (1.36mm), transition to Yellow. (Or swap Black for Yellow)
6. At layer #21 (1.76mm), change to Jade White for the remainder of the print. (Or swap Blue for White)

For those seeking a simpler version, a similar design is available from the maker "undi23" at Maker World. The color choices were inspired by Protoprints' rendition of Starry Night, which can be viewed at Maker World. Having printed this design myself, I can attest to its stunning visual impact.

Please note, after slicing, the file preview might display "floating regions" or other visual anomalies. However, if the estimated print time is around 4 hours and there's an appropriate amount of filament consumption, the print should proceed normally. Also, be aware that Hueforge prints often take longer to slice due to their complexity, so patience during this process is advised.

I highly value feedback and am keen to see how other makers adapt or build upon this design