Under Table Drawer by Lexx_3D

Lexx_3D

Tools>Organizers

Print Profile(7)

All

P1S

P1P

X1 Carbon

X1E

Drawer 155x220x55 - with bottom roundings

Designer

4.3 h

2 plates

4.8(4)

Drawer 155x220x55 - without bottom roundings

Designer

4.1 h

2 plates

5.0(1)

Drawer 127x220x55 - with bottom roundings

Designer

4.1 h

2 plates

Drawer 127x220x55 - without bottom roundings

Designer

3.8 h

2 plates

Click to see more

Open in Bambu Studio

Boost

Released

Description

This is the “Under Table Drawer” designed by me. Please note that the Dimensions are the inner ones of the drawer.

Note: The Holder is slightly bigger than the drawer!

You can mount it under your desk with doublesided Tape. I also added holes for small magnets (d: 6mm; h: 2.6mm) to make the drawer lock into place.

Please feel free to contact me for other Dimensions!

Standard Inner Dimensions Drawer:

Length: 110mm || 155mm
Width: 140mm || 220mm
Height: 30mm || 55mm
wallthikness: 1.2mm || 1.2mm

Standard Dimensions Holder:

Length: 162.8mm || 207.8mm
Width: 157.6mm || 237.6mm
Height: 7.2mm || 7.2mm

Settings:

layer height: 0.2mm
line width: 0.42mm
wall loops: 1-3
supports:
- Drawer: yes
- Holder: no

Assembly:

Be careful not to squeeze the holder together when sticking it to the table, otherwise the drawer will no longer slide in smoothly.

Update:

2024/03/20: added new Version: 127x220x55mm
2024/02/06: I added new Versions without the bottom roundings because they did not print that well at larger models.
2024/02/06: I have to apologize to all who downloaded the old 200x220x55 Version, because it is actually 155x220x55. I changed the name to “155x220x55”
2024/01/31: added new Version: 155x220x55mm

Feel free to upload your Makes!

Comment & Rating (10)

@user_3788572154

Excellent design, but I believe that if double-sided adhesive tape is used for a long time, the tape will lose its stickiness. Coupled with the pressure on the drawer, there is a risk of detachment. If self tapping screws can be used, it will be more secure.

The designer has replied

@Lexxoo

Hey, I've been using the little drawer for half a year now. Since then, it has stored many magnets that are very heavy. So far it doesn't appear that the double-sided tape is losing its stickiness in any way. However, I recommend using a very strong tape like I do. :)

(Edited)

@zanelat

hi, nice job.. can you explain how you add the support on 3mf? when i disable the support, the support keep there.. thanks

The designer has replied

@Lexxoo

Hey, I activated the support in the settings of the object, not in Global!

@SoeldnerUffz

Print Profile

Drawer 155x220x55 - with bottom roundings

Great Print and a great Print Profil. The Support is easy to remove and it fits all together. i Use screws for more stability and its just work fine. Need to print more of these