Planetary Gear Fidget Finger spinner - Mass increase by B-Engineer

B-Engineer

Hobby & DIY>Other Hobby & DIY

GIF

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1 h

1 plate

4.7(20)

Open in Bambu Studio

Boost

113

Released

Description

----------if you like my work please, follow me and spread some love giving some like, ill do the same❤️---------

The model profile has undergone a redesign based on your valuable feedback. The primary focus of the redesign is to enhance external contours by redistributing mass, aiming to facilitate smoother and more enduring rotations.

The redistributed mass not only serves the purpose of improving rotational dynamics but also contributes to the overall durability of the finger spinner.
Material integrity and structural robustness have been carefully maintained to ensure a long-lasting and reliable product.

→Before obtaining a fluid and lasting movement it is necessary to rotate the spinner for some time in order to smooth out the sharp edges, this is due to strict tollerances that i used for make possible print it in place.

-If stringing occour you can simply remove it using your lighter as follow:

If you want any modifications or variations, feel free to ask, if you have specific requests for a spinner you would like to have, write to me privately, and I will do my best to fulfill your desires❤️

Comment & Rating (40)

@Lunallusion

Print Profile

0.2mm layer, 2 walls, 15% infill

Broke free very easily and spins wonderfully without any grinding and it’s fun to mess with 10/10

The designer has replied

@BEngineer

thank you so much for this review, I really appreciate it❣️🙏

(Edited)

@clnr_794

Print Profile

0.2mm layer, 2 walls, 15% infill

I scaled x and y of the planetary gears down by 0.05 mm, now it runs smoothly after breaking loose.

The designer has replied

@BEngineer

thank you so much for this review🙏 if you liked mine work, please, consider to leave a Boost to the model❤️

@ElektroStylezZz

Print Profile

0.2mm layer, 2 walls, 15% infill

Tolle Quallität, sehr sauberer Druck und schneller Lauf.

The designer has replied

@BEngineer

thank you so much for this review🙏 if you liked mine work, please, consider to leave a Boost to the model❤️

@Inofaith

Print Profile

0.2mm layer, 2 walls, 15% infill

Didn't spin as well as i hoped, but that's my personal opinion and a limitation of weight on the outer ring when you go this small. Otherwise it printed quite alright, was a bit stuck in the beginning, but after a little prying it worked well.

The designer has replied

@BEngineer

thank you so much for this review, I really appreciate it❣️🙏 I invite you to take a look at my new models, you might find something nice and let me know if you will follow me, i'll make the same😄

@Inofaith

Replying to @BEngineer :

Of course I’ll follow you, you make some cool stuffs 😁

(Edited)

@BEngineer

Replying to @Inofaith :

thank you so much, I followed you back😁🙏

@DeliciousPandaT

Print Profile

0.2mm layer, 2 walls, 15% infill

Excellent version of the planetary spinner.

The designer has replied

@BEngineer

@GeddesWorks

Print Profile

0.2mm layer, 2 walls, 15% infill

A bit sticky at first but good after some wear

The designer has replied

@BEngineer

thank you so much for this review🙏 if you liked mine work, please, consider to leave a Boost to the model❤️

@grs314

Print Profile

0.2mm layer, 2 walls, 15% infill

瑞本透明petg打有些粘连

The designer has replied

@BEngineer

thank you so much for this review🙏 if you liked mine work, please, consider to leave a Boost to the model❤️

@LeRmXen3D

Print Profile

0.2mm layer, 2 walls, 15% infill

Foncitonne au top

The designer has replied

@BEngineer

thank you so much for this review🙏 if you liked mine work, please, consider to leave a Boost to the model❤️

@c.m.d.

Print Profile

0.2mm layer, 2 walls, 15% infill

It's a fun little fidget spinner. After printing i had to stick a screwdriver between all the gears and wiggle it around to make it move freely, but once it got free it spins very well.

The designer has replied

@BEngineer

thank you so much for this review, I really appreciate it❣️🙏

@SG80

Print Profile

0.2mm layer, 2 walls, 15% infill

Good!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.