Modern Desk Light by giaimef

giaimef

Household>Office

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 15% infill

Designer

17.4 h

6 plates

4.9(16)

Open in Bambu Studio

Boost

215

382

398

313

Released

Description

This modern lamp allows you to illuminate your desks with two configurations: a frame to accommodate an LED strip or a phone holder.

There are multiple adjustment points:

Easy attachment to the desk using a clamp with adjusting screws;
Ability to rotate the entire structure by 360 degrees;
Each arm allows rotation from -50° to +50° approximately;
The LED frame adjustment arm can also rotate by 360 degrees;
Hooks are available to secure the LED power cable or the phone charger cable (max. Ø 4 mm);

Please note, two M3 screws (length up to 8 mm) are required to screw the LED frame cover. The hole that allows the power cable to enter the frame is 4.5 mm. If you are not able to solder you can use a led strip with the connectors already prepared, but there is a risk that you will not be able to get the cable through the hole.

Ver. 1.01: Added a new optional version of the screws that allows them to be tightened using a 24 mm spanner.

Ver. 1.02: Modified clamp screw (Thanks to @miao_o)

I've printed my own version using a mix of Sunlu PETG and Bambu Lab PLA Tough. This is the result:

Comment & Rating (36)

@miao_o

只有这个螺丝是圆头的根本无法拧入，其他螺丝🔩没问题。 Only this screw has a problem and cannot be screwed in at all. The other screws are fine.

The designer has replied

@giaimef

Oh I am sorry... keep in mind that the tolerances I left are >.2 mm so it really depends on the filament and the specific printer. If you don't know how to edit the STL I'll add a RAW with higher tolerances :)

@miao_o

Replying to @giaimef :

我英语不好不知道怎么形容，其实不是公差的问题，是这个螺丝上面锥形的部分过宽导致无法拧入。当我把这个螺丝上面一层锥形的裁切两段再打印就可以拧入然后再用胶水把两端粘住就可以了。建议把这个螺丝上半部分改到小于螺纹宽度即可。 I don't know how to describe it. In fact, it is not the problem of tolerance, but the conical part on the top of this screw is too wide, which makes it impossible to screw in. When I cut the top layer of this screw into two conical sections and print it, I can screw it in and then glue the two ends together. It is recommended to change the top half of this screw to less than the width of the thread

@giaimef

Replying to @miao_o :

I see. I loaded a new updated print profile and added the RAW files with a new version of the screw (Clamp 3A and 3B). If you want, go ahead and try printing. Thanks for your help.

(Edited)

@Booyashaka

Print Profile

0.2mm layer, 3 walls, 15% infill

the knob are a bit hard to tighten, maybe add screwdriver slot? thanks for sharing

The designer has replied

@giaimef

Hi, thanks for the review. In the RAW I had added a screw with a 24 mm metric keyway. Let me know if it can solve your problem :)

(Edited)

@Booyashaka

Replying to @giaimef :

awesome, thx

(Edited)

@joyandenjoy

here is the end resault，everything is perfect！ thanks a lot！

The designer has replied

@giaimef

Looks great, thanks 🙏🏻

@Haxxsaw

What LED are you using? Seems kind of important to know

The designer has replied

@giaimef

Hi, in my case I used a simple LED strip I had. The hole that allows the power cable to enter the frame is 4.5 mm. If you are not able to solder you can use a led strip with the connectors already prepared, but there is a risk that you will not be able to get the cable through the hole. If you have this need I can adapt the model and make a version with a larger opening. Let me know :)

@Haxxsaw

Replying to @giaimef :

Thank you

@RomeEight1

This design looks fantastic! Would you be willing to share the source CAD files? I'd like to design a base for it to simply sit on a desk and a few different heads to mount different objects for a project I'm working on. Thank you!

The designer has replied

@giaimef

Sure. Text me in dm :)