Trash bin - box (in vase mode) by zemistr

zemistr

Household>Other House Models

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Official - PLA - 0.2mm layer, Vase mode

Designer

1.8 h

1 plate

4.9(63)

Official - PETG - 0.2mm layer, Vase mode

Designer

2.1 h

1 plate

4.8(14)

FAT! 0.8mm nozzle, 0.56mm layer, 1 walls, 0% infill

3.4 h

1 plate

Boost

136

199

651

569

Released

Description

With nozzle 0.4 mm you can set external perimeters to 0.99 mm and layer height up to 0.3 mm.

With nozzle 0.6 mm you can set external perimeters to 0.99 mm and layer height up to 0.44 mm.

Comment & Rating (89)

@Markury

The print profile is no longer public

Very nice and sturdy! Only note is the estimated print time being less than an hour when it took over 2 hours

(Edited)

The designer has replied

@AneoPsy

Thanks for reviewing, I appreciate the feedback. which filament did you used? I know bambulab automatically adjust the print profile based on the filament selected by the user (or the AMS) and it affect the print time (eg: silk PLA is printed twice slower than normal PLA - the maximum speed is automatically setup by the printer based on the filament selected)

(Edited)

@Markury

Replying to @AneoPsy :

That must be it! I wasn't using Bambu PLA for this one, it's some random old rainbow filament from Amazon. Thank you for clearing that up, I will definitely print more :)

(Edited)

@AneoPsy

Replying to @Markury :

You welcome, thank you for the edit.

@BjornB

I like how the 0.8 nozzle behaves, with the fat layer height it can do. 0.56 mm is the highest recommended for this nozzle, so i went for that. And 1.2 mm layer width, gives a fat look and gives the bin strenght.Scaled the model up to 245 mm, so it's usable as a normal trash bin =) Added a print profile for the 0.8 nozzle. Love this trash bin! 5/5 =)

@heyderekp

Print Profile

Official - PETG - 0.2mm layer, Vase mode

Printed a bunch of them for my desk/aquarium supplies. Printed great each time!

@hendu72

Print Profile

Official - PLA - 0.2mm layer, Vase mode

I printed at 150% scale with a .06mm nozzle and 1mm line thickness. I wanted some bins for waste and used the AMS lite to use up a couple spools that were at the end of life. looks good and working great so far!