Temperature tower PLA from 180 to 225 by TomMi

TomMi

3D Printer>Test Models

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.4 h

1 plate

4.8(46)

Open in Bambu Studio

Boost

1.3 k

420

Released

Description

Simple temperature tower PLA from 180 to 225. Download raw file to obtain coded print! :)

temp calibration

temptower

temperature tower

temperature calibration

temperature

Comment & Rating (52)

@Tysoncolley

I don't understand why this is on bambu handy as a click to print file. The temp doesn't change.

The designer has replied

@tommi

Read description, you have to download and print coded raw file.

@Tysoncolley

again, what is the point in setting this up as a click and print..

@Jeremydgordon

Print Profile

0.2mm layer, 2 walls, 15% infill

Great!!!

@user_2021011972

Where is this raw file?? I only have 3 options, 1. Open in BambuStudio; 2. 3MF file; 3. STL file;; I tried all 3, none worked!?!?!?

Show original

@warlogh

Print Profile

0.2mm layer, 2 walls, 15% infill

tower ia very good. unfortunately couldn't get finished print as it was taking off from build plate when it was almost finished

@Jbgrueneberg

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

great print

@The_echoscapes

Print Profile

0.2mm layer, 2 walls, 15% infill

thank you. I'm now printing a little hotter than before :)

@Vicevapor

Print Profile

0.2mm layer, 2 walls, 15% infill

Make sure to download the Stl/raw file and it works perfectly. I broke it into parts and deleted the top 6 parts on the tower because I didn't need them. I Booleaned them back together (you probably dont need to do that). It's a good way to save time and a little filament. Thanks for uploading.