This is a frame in the Baroque style made by cncmodels4you (218_Rama) with an integrated light bar (art light). I made this to fit the Starry Night Hueforge by jdlg2065
https://makerworld.com/en/models/15195#profileId-19111

I cut the frame into 2 pieces to make it fit flat, it could probably be printed in 1 piece tilted on an angle with lots of supports but I'm happy enough with how it turned out.

Filament used:

Inland PLA Silk Gold/Silver

I used 2 sections of UV and 2 sections of warm white 5V LED strips on this one with a SPDT 3 position switch inline. fish the wires through the included holes. I glued the frame pieces to a 8in x 9.5in piece of presentation board.

LED Strip (any will do, just make sure your power supply matches the voltage and has sufficient current to drive the LED's. 5V 1A should be plenty for 8 LEDs.

Amazon link for UV LED - https://a.co/d/evIQ9A5

Amazon link for White LED - https://a.co/d/4S3RrNV

Amazon link for SPDT switch - https://a.co/d/fqRZD2V