Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
- PLA+ SUNLU Black
- PLA+ SUNLU Orange
- PLA+ SUNLU Pure Yellow
- PLA+ SUNLU Silver
- PLA BambuLab Basic Jade White
- PLA BambuLab Basic Red
Swap Instructions:
- Start with Black
- At layer #3 swap to Red
- At layer #7 swap to Orange
- At layer #11 swap to Pure Yellow
- At layer #15 swap to Silver
- At layer #19 swap to Jade White
Dimension: 200 mm x 113 mm
![](https://makerworld.bblmw.com/makerworld/draft/461252/2024-01-28_64ce1ce0cbf7b.png?image_process=format,webp)