Fidget Spinner
Print Profile(2)
Description
This simple and clean fidget spinner is designed to be print-in-place, so it prints fully assembled and ready to spin — no extra assembly or hardware required!
✅ Features
Fully 3D printable in one piece
Functional bearing with integrated balls
Minimalist, modern design
Great for stress relief and fun
⚙ Print recommendations
Material: PLA or PETG
Layer height: 0.2 mm (or finer for smoother movement)
No supports needed
2-3x walls
20% infill recommended for extra strength (optional)
Make sure your print bed is properly cleaned to ensure good adhesion and avoid print failures
If your first layer isn’t perfectly calibrated, consider increasing the elephant foot compensation slightly to prevent the bottom edges from fusing and blocking movement
💡 Tip
After printing, gently loosen the moving parts — you can also add a tiny bit of lubricant if you'd like it to spin even more smoothly.
Check my another fidget spinner
https://makerworld.com/en/models/1619070-planetary-gears-fidget-spinner#profileId-1708798
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (28)