Just a simple push pad for pushing wood on a jointer or table saw. I glued a strip of rubber to the bottom for grip. I used a simple soft rubber originally intended for garden enclosures. (4mm thick)
V1 is my first try
V2 is with better ergonomics (better grip with the whole hand)
For ideal sizing, print at 125 %
Filament I used is eSun PLA+ for its zero warping and extreme toughness (for PLA at least).
Printed at
0,3 layer height
20% infill
Print with support
0,6mm line width (CHT 0,6mm nozzle)