Elevate your plant’s frequencies with this trippy suspended flower pot. Great for succulents and other small plants.

I designed this planter to be printed in multiple parts for slotted assembly. it takes 3 plates to complete. The STL’s are already separated into 3 files, one for each plate. If using a gradient, I suggest printing the Drip Tray first, the Planter second, and the Feet/Hook third. I'm including a .3mf file that is set up for the A1.

General Print Settings for non-Bambu users:

The feet, hook, and drip tray are all printed with:

0.4mm nozzle

0.2mm layers

3 walls

5 solid top/bottom layers

5% Gyroid infill

The actual planter/pot is the same except for:

0.14mm layer height

Feel free to experiment with settings as only you know what your printer is capable of. Happy Printing!

Filament used in pictures is iSanmate