Splitter V2 UPDATE AMS Lite A1 mini y A1 by acevalsl

acevalsl

3D Printer>3D Printer Accessories

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

metrics 10 0.12mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

4.1(8)

1/8 thread 0.12mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

4.0(1)

Boost

Released

Description

V2 UPDATE

Update of the Splitter designated for the AMS LITE, in which the inlet pipe of the outer filament has been reinforced and an opening has been put at the beginning to be able to put a piece of ptfe tube

Splitter, designed for the AMS Lite of the A1 mini and the A1. With this design you will be able to print from the outer filament without disconnecting anything.

With this design, you don't add weight to the printer's head, avoiding problems

The original design is for 1/8 thread

Some people have asked what to buy. I am attaching an address as an example:

PC4-M10 macho

https://www.amazon.es/UniTak3D-Neumático-Acoplador-Compatible-impresoras/dp/B08QMGHNLT/ref=sr_1_5?__mk_es_ES=ÅMÅŽÕÑ&crid=3MF9F8M8DUO59&keywords=Creality+Conector+PC4-M10&qid=1705944374&sprefix=creality+conector+pc4-m10%2Caps%2C158&sr=8-5

NEW: You can download it for metric thread 10. Thank Marcus T, you for your idea and your help to carry it out and be able to use this type of thread with metric. https://makerworld.com/en/u/1120084680

A video of how to install it.

NOTE: To remove the bracket, use a thin allen key from the other end and press.

IT CAN BE DONE FASTER, BUT IT DOESN'T COME OUT CORRECTLY AND YOU CAN CLAM THE FILAMENT. I RECOMMEND USING THE PARAMETERS OF THE ORIGINAL 0.12 DESIGN

Comment & Rating (14)

@tomcat_z

V2 is much better than V1, thanks! BTW, What's this ?

The designer has replied

@acevalsl

It's not useful at all. I downloaded it from the page and had to remove it. Theoretically it's to be able to take out the tubes but it doesn't work

@plc_one

Print Profile

metrics 10 0.12mm layer, 2 walls, 15% infill

Works like a charm

@Agespoom

Print Profile

metrics 10 0.12mm layer, 2 walls, 15% infill

nice

@laser_mike

Print Profile

metrics 10 0.12mm layer, 2 walls, 15% infill

works most of the time but occasionally gets hung up on something

The designer has replied

@acevalsl

I don't understand you? What do you mean that from time to time it hangs from something?

@laser_mike

it doesn’t always feed smoothly and occasionally gets stuck and I have to manually assist the feed. no big deal bc I made a slightly more reliable one. thanks for your efforts.

@alexkill536ITA

Print Profile

metrics 10 0.12mm layer, 2 walls, 15% infill

pattern is not as comfortable as it looks the filament gets stuck in the flow

The designer has replied

@acevalsl

I'm sorry to tell you that many people have it printed, I use it myself and it works perfectly. Look at the filament you've used if it's left you burr or something because it's not normal

@user_2723613254

Print Profile

1/8 thread 0.12mm layer, 2 walls, 15% infill

Maybe a tiny bit snug. But quick print that does exactly what it says on the box. eeded it for my AMS-lite with external spool support mod. Did the job brilliantly.

@focusst

Print Profile

metrics 10 0.12mm layer, 2 walls, 15% infill

cool

@c4y7h72zn6

Print Profile

metrics 10 0.12mm layer, 2 walls, 15% infill

super zum aus der Trockenbox zu drucken. kein lästiges umstecken mehr. Danke

@Hatman.nl

Print Profile

metrics 10 0.12mm layer, 2 walls, 15% infill

@wseale

Print Profile

metrics 10 0.12mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.