Phone Stand (with space for charger, no AMS required) Remixed by kovalovn27

Remixed by

kovalovn27

Household>Office

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

THIS ONE 0.16mm layer, 3 walls, 15% infill (LESS WIDE)

Designer

2.8 h

2 plates

5.0(1)

TALLER - 0.16mm layer, 3 walls, 15% infill

Designer

3.4 h

2 plates

5.0(1)

Boost

Released

Description

Design based on the Reckit Phone Stand (NO AMS NEEDED), but added more verticality for room for a charger.

The charger can be routed through the back or side.

No AMS is required, print the side pieces separately and just push them into place.

Also made the model slightly wider for bigger phones.

If you have a taller phone, you can try the "TALLER" profile which has a larger base and length of the backpeice

Comment & Rating (10)

@user_2819184847

Print Profile

0.16mm layer, 3 walls, 15% infill

Nice design and prints really well. But sadly the isb-c plug of my OnePlus charger cable is too long to be able to have the phone standing when the charger is connected. also the back is a bit too low to have a large phone standing stable.

The designer has replied

@kovalovn27

I am posting a new profile that has a taller back and taller front piece that will hopefully suit your needs!

@user_2819184847

Replying to @kovalovn27 :

@kovalovn27: Sounds great, I will stay tuned for that. Let me know if you need measurements for the (OnePlus) charger plug.

@StarBuck_BSG

Print Profile

0.16mm layer, 3 walls, 15% infill

Print came out so good in ABS-CF. very good print profile and model

@Killdozer666

Print Profile

0.16mm layer, 3 walls, 15% infill

great model and settings. I printed mine on PA6-GF Nylon and it came out perfect. if you have a very large phone like an iPhone Pro MAX, it is easy to flip it over if you touch the phone towards the top. but is its perfect for 95% of phones.