The design of this PCB workstaton from giufini at printables is just insane!

You also can buy complete sets, check out the model on printables if you are interested.

I wanted to put all the options into one project so i try to sum the requirements here. just duplicate the components as you need in the mobile application and print on the fly without hassle with any slicer settings.

Each PCB holder needs

• M5x12mm Hex Head Screw
• M5 Wing Nut

There are 3 types of arms, see additional hardware requirements below

• articulated arms: https://www.printables.com/model/392236-pcb-workstation-kit-2023-with-articulated-arms
  • adapter Type A for Mini Grabber Test Clips
  • adapter Type B for SparkFun Alligator Clips
  • adapter Type C for Hirschmann Grabber Clips
  • adapter Type D for Hirschmann Spring Loaded Test Probes
  • adapter Type E for Pomona Micro SMD Grabbers
  • adapter Type F for E-Z-Micro-Hooks
  • adapter Type G for Saleae and Zeroplus Logic Analyzers Probes
  • adapter Type H for Tektronix Logic Analyzers Mini Grabber Test Clip
• nano probes: https://www.printables.com/model/414086-pcb-workstation-kit-2023-with-nano-probes
  • M4x10mm Hex Head Screw per arm
  • M4 Wing Nut per arm
  • 4mm flat Washer per arm
  • acupuncture needle (0.3 x 30mm)
• needle probes: https://www.printables.com/model/419067-pcb-workstation-kit-2023-with-needle-probes
  • M4x10mm Hex Head Screw per arm
  • M4 Wing Nut per arm
  • 4mm flat Washer per arm
  • acupuncture needle (0.8 x 40mm)