Hey guys! this is my first ever hueforge art. Kindly let me know your feedback below!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Gray Transmission Distance: 2
    PLA BambuLab Basic Silver Transmission Distance: 0.5
    PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
    Start with Black
    At layer #5 (0.48mm) swap to Gray
    At layer #12 (1.04mm) swap to Silver
    At layer #20 (1.68mm) swap to Jade White for the rest.