I designed this thing to be a replacement for the original cover using the original filter.
I had the ECU flashed and the flashers recommend you remove the snorkel leaving a very blunt hole in the origonal cover.
So I designed this cover with an inlet that lets the air enter a little smoother. It has the same diameter hole as the original cover. Tested it today and it works just great!
Print in PETG or ABS for heat resistance.
Printer:
Bambu Lab X1 Carbon with AMS
Rafts:
No
Supports:
Yes
Resolution:
0,2mm
Infill:
15%
Filament: Generic PETG Green