Bambu Lab A1 Mini spool filament holder with 608 bearings
Remixed by
Copyright Claim
Bambu Lab A1 Mini spool filament holder with 608 bearings
Remixed by
Boost
7
10
8
Print Profile(1)
0.2mm layer, 6 walls, 25% infill
Designer
2.9 h
1 plate
Boost
7
10
8
0
44
24
Released
Description
I noticed that my printer struggled to pull the TPU when i tried to print it, so i decided to remix a spool holder and an attachment from the A1 mini to make this work way smoother. and it does, fits regular spools no problem and really helps with the TPU
Items need is 2x 608 Bearings of any quality
and maybe a screwdriver to remove the oem spool holder from the arm. If you look closely at your arm when you remove it you will see a small tab on the inside of the arm, press it and pull out the oem arm then replace it with this one!
Comment & Rating (8)
All
Print Profile
0.2mm layer, 6 walls, 25% infill
exelent!
0
Reply
funktioniert super
0
Reply
Hello, good job but I had to cut the cross by 1cm to fit completely. :/
(Edited)0
Reply
genau sowas habe ich geesucht! Vielen Dank!!! Mach weiter so!
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
Strength Issue:schwierig zu drucken. musste es mehrmals probieren. Warum ist die Arolle in der Mitte zweigeteilt?
The designer has replied
0
Reply
easier to print with 2 peices
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
No more
Related Models
© 2024 MakerWorld