Unleash your creativity with the Stealth Press Dremel Add-On.

The Dremel (rotary tool) Add-On is the perfect companion for the Stealth Press, enabling you to elevate your crafting experience. Its seamless integration, versatility, and precision make it an essential tool for anyone who seeks to unleash their creativity.

This mod seamlessly integrates with the Stealth Press core, unlocking a broader spectrum of use cases and applications.

You can now tackle a wider range of projects easier and faster - from fabricating engineering components to crafting intricate jewellery by using variety of rotary tool accessories.
 

More information about Stealth Press (core) and project files are here.

BOM (bill of materials)

ASSEMBLY MANUAL

Full assembly manual + special complimentary sandwich plate model, available for project supporters only on Printables.   CAD (.step) file is available for download here.

PRINT GUIDELINES

Here are print guidelines for you to follow in order to have decent success with printing parts:

Side notes to the print guidelines

PLA, PLA+, and PETG are also considerable filament choices. However, take into account that power tools radiates some indirect heat. The usage of less temperature-stable filaments may result in part deformations over time.

A wall count of 4 is an absolute must to ensure the structural integrity of the parts. There is no need to go over the top with this. 4 walls are perfectly fine for this particular build.

File naming convention for printed parts

The parts use this naming convention:

• PRIMARY COLOR — These files will have nothing at the start of the filename.
  Example: dremel_mount_x1.stl
   
• ACCENT COLOR — Files have “[a]” to the front of any STL file that is intended to be printed with accent color. Example: [a]_strain_relief_7mm_(L)_x1
   
• LEFT / RIGHT SIDE MATTERS — Files have “(L)” or “(R)” in the STL file name, where it does any diffrence to the build. Example: [a]_strain_relief_7mm_(L)_x1.stl
  
  If there is no difference in terms of side, simply amount of parts required for build is stated as “filename_X1.stl" or “…_X2.stl”. 
   
• TOOL/HELPER — Files have “[t]” to the front of any STL file that is intended to be printed with accent color. Example: [t][a]_MGN12_assembly_tool_x1
   
• COUNT OF PARTS — Files have “x1” to “x4” at the end of any STL file. The number represents the count of identical parts to be printed. Example: [a]_m5_1mm_spacer_x4 (In this case you will need to print 4 identical spacers).

Supported rotary power tools

Project is built and tested with Dremel 3000 series. Other models and other brands sharing the same dimensions for main attachment screw might fit.

Supported rotary tool accessories

Any.

Credits and acknowledgements

• VORON and ARMCHAIR ENGINEERING Discord communities for being able to discuss, receive feedback and gather ideas for this project.
   
• KBD3D, DFH and LECKTOR for creating (supported) KITS for the Stealth Press Heat-set Insert Press and supporting my work. 
   
• Many other exceptionally clever and good people in 3DP community for helping to build the project, encouraging me to push it forward and supporting it in many other ways.

CHANGELOG