Stackable Wind Spinner
Print Profile(1)
Description
A stackable wind spinner/whirlygig to hang in your garden. There are two main models, which spin in opposite directions. They can be stacked by placing a swivel between them so that they can spin independently. I used #4 ball bearing snap swivels between and at the top. I bought the swivels at Walmart, but they are also available from Amazon. The top and bottom of the spinners are threaded. There is also a screw in plug for the bottom if you don't want to stack them. The threaded stud screws into the bottom to accept a cap in case you do want to stack them. This is an easy print, no supports or AMS needed. The models are scaled to 80%, which works well, but it should work just fine at 100%.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (120)