Print Profile(2)
0.2mm layer, 6 walls, 25% infill
Designer
4.5 h
5 plates
For A1 mini, 0.2mm layer, 6 walls, 25% infill
4.9 h
5 plates
Boost
83
168
19
0
261
152
Released
Description
Designed from new to keep the cable hold and secure in two of the three positions available.
Best to start fitting the cable end in the middle and turn it around inside the holder until the other end fits in one of the other hunging clamps.
Original standard design is for 4.0-4.5 mm cable, best for large usb and ethernet cables
Design for 5.5-6.0 mm is scale it at 1.4x, convenient for AC power and HDMI Cable
Scale of 3.3-4.0 mm is scale it at 0.8x, intended for medium usb cables
Last scale of 2.6-2.9 is at 0.68x, for mini usb cables
Hope it helps this printing for tyding up your desk, drawer…
Comment & Rating (19)
All
Print Profile
For A1 mini, 0.2mm layer, 6 walls, 25% infill
I don’t know if it’s because I choose the wrong print file (picked the A1 file instead of my P1S), but it got those extra wastes printed with the smaller sizes.
However, after I cleaned them up, I got all 4 almost all perfectly printed (got some strides on those smaller ones).
I’ll try to print again with the right print file for P1S and see if it’s really the A1 one that has that issue.
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
would stick to the bed
The designer has replied
0
Reply
Hi ybase305, sorry to hear about that, which of the prints profile have you used?
0
Reply
it original design
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
printed quickly and well
1
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
sehr gute Datei erfüllt seine Aufgabe endlich kein kabelsalat mehr
1
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
Other Issues:one of the molds was all poop
The designer has replied
0
Reply
Hi, Sorry about that wich one was? I can brim them all is first later adhesion is compromise or is it related to your printer?
0
Reply
it was a mid size one. I don’t know why it printed like this, didn’t see any obvious issues. I was on my Bambu A1
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
1
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
1
Reply
Print Profile
For A1 mini, 0.2mm layer, 6 walls, 25% infill
The designer has replied
0
Reply
Cheers
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
1
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
1
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld