ZEND SLIDER (Awesome Utility Knife) Remixed by dylcro2

Remixed by

dylcro2

Tools>Hand Tools

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

3 walls, 20% infill

Designer

31 min

1 plate

4.8(67)

0.12mm layer, 2 walls, 30% infill, super smooth

53 min

1 plate

5.0(9)

Open in Bambu Studio

Boost

112

250

481

578

Released

Description

So I uploaded the Utility Knife (Perfect fit Blade) last month and it was very popular.

Now ive done my own. This one now has a nicer grip, my own custom brand design and a cut out in the slider so you can fit it on a keyring!

Print profile good to go. DOWNLOAD AND PRINT!

Body is made 1mm longer to prevent the tip of the blade sticking out for safety. I have used another remix design for the slider as the blade fits perfect in this one. Handy utility knife for DIY and for you 3d printing projects.

WARNING- SHARP OBJECT! PLEASE PRINT AND USE AT YOUR OWN RISK, THIS IS NOT A HEAVY DUTY UTILITY KNIFE.

Will fit all common utility knife blades.

Assembly- Install the blade in the holder and slide in from the back side of the body to the front. If movement is slightly stiff, dab a minute amount of Bambu Lubricant Oil in the top and bottom body rails to help glide.

Full credit goes to original designer - Talon Utility Knife by HallPrecision - Thingiverse

Happy Printing! :)

Comment & Rating (92)

@RaGo_awesome

Boosted

Print Profile

3 walls, 20% infill

Quick, good quality, awesome!

The designer has replied

@dylcro2

looks awesome :)

@whowantstoknowi

Boosted

Print Profile

3 walls, 20% infill

👍

The designer has replied

@dylcro2

Thanks for the pic, looks awesome!

@laser_mike

Print Profile

3 walls, 20% infill

great little keychain utility knife . awesome job

The designer has replied

@dylcro2

love the colours :)

@tetsuo.kin69

Print Profile

3 walls, 20% infill

Kept having problems with out knife loosing the blade or not working, printed this, Put it together and it's a great handy tool for us while we craft... Printed 4 of them now so i've always got one laying around somewhere...

The designer has replied

@dylcro2

:) they do come in handy as a spare knife. thanks for printing , looks awesome!

@rross112

Print Profile

0.12mm layer, 2 walls, 30% infill, super smooth

works great!

@trorker

Very nice and practical!! The only advice I can give is to make a version with the body not straight, but diagonal, following the angle of the blade, similar to the "Utility Knife F1" model https://makerworld.com/en/models/403903?from=search#profileId-305566

(Edited)

@El_Twin

Print Profile

3 walls, 20% infill

Printed good with PLA. A little tight but after sliding it a few time it started to loosen up! excuse my picture it ain't dirty it's just leftover petg from previous print.