2in1 and fully 3D Printable Sliding Bevel & Angle Gauge

A Sliding Bevel (also known as a bevel gauge or false square) is an adjustable gauge for setting and transferring angles. Different from a square, which is fixed and can only set a 90° angle, the sliding bevel can set any angle and transfer it on another piece.

This is just as functional as a non-printed version, but in addition, has angle markings built into the handle side faces. These run in 15deg major increments, with some smaller markings at 5°…..hence it is possible to gauge, or just quick reference, some of the most commonly used angles. One side of the handle shows an angle range of 0-90° while the other side shows 90-180°.

All items print with zero support, and no need for metal fasteners as the knurled thumb screws are all printed too. Makes for very satisfying assembly and use.

Choose ‘Multicolour’ print profile for smooth handle faces complete with flush Text in contrasting colour….

or Choose ‘Singlecolour’ print profile for all items on a single build plate & with recessed Text.  

Will fit any BambuLab printer including the A1 Mini… enjoy :)

Assembly: The handle plates index together & sandwich the sliding blade. All are secured with use of the two captivated taper nuts, one short bolt (that can be done up using a screwdriver or similar) and one threaded knob for adjustment & clamping of the gauge blade at the desired location. See animated GIF (in images) & exploded assembly BOM below.