Tiny Shopping Cart (print-in-place)


Print Profile(4)

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
X1 Carbon, P1S, P1P, X1, X1E, A11.2 h
4.9
0.24mm layer, 3 walls, 15% infill
0.24mm layer, 3 walls, 15% infill
A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A11.2 h
5.0
0.24mm layer, 3 walls, 15% infill
0.24mm layer, 3 walls, 15% infill
X1 Carbon, P1S, P1P, X1, X1E, A11.1 h
5.0
0.24mm layer, 2 walls, 10% infill
0.24mm layer, 2 walls, 10% infill
X1 Carbon, P1S, P1P, X1, X1E, A11.1 h

331
461
158
865
1 k
Released
Copyright Claim
Model
Comment & Rating
Remixes
Related Models

Model

This is a tiny shopping cart that can be printed in place with no supports or assembly required. The wheels roll and there's a basket divider that can be opened and closed to create a separate section within the cart.

 

PLEASE NOTE that the long bridges on one side may pose a serious bridging stress test for some 3D printers. So while the model can be printed without supports, consider adding supports if your printer's bridging capabilities are not optimal. This will prevent the bridges from drooping and ensure a smoother surface finish for your print.


License

Comment & Rating (158)

0/5000

0.24mm layer, 3 walls, 15% infill

printed perfectly and separated from the brim perfectly, girlfriend printed this one without any issues

The designer has replied
2
Reply

thanks(Edited)

1
Reply
0.2mm layer, 2 walls, 15% infill

I thought this would be a novelty for my granddaughter for a few minutes, but had to print several more and she put the little toy dogs I had printed in the cart and had shopping cart races all weekend. Well Done!

1
Reply

This is amazing! Please tell me where to get the dog files. Thank you

0
Reply
0.24mm layer, 3 walls, 15% infill

funny print

The designer has replied
1
Reply

thanks (Edited)

1
Reply
0.24mm layer, 3 walls, 15% infill

Love It! Printed without any problems at all, the model owner clearly spent time making it a fun project.

The designer has replied
1
Reply

thanks (Edited)

1
Reply
0.24mm layer, 3 walls, 15% infill

easy peasey

The designer has replied
1
Reply

Thanks(Edited)

1
Reply
0.24mm layer, 3 walls, 15% infill

Printed well.(Edited)

The designer has replied
0
Reply

No sorry but the problem with the strings is NOT the profile but the filament settings used. Remember that each filament has its own settings and the machine is calibrated properly.

0
Reply
0.24mm layer, 3 walls, 15% infill

The designer has replied
1
Reply

thanks (Edited)

1
Reply
0.24mm layer, 3 walls, 15% infill

The designer has replied
1
Reply

Thanks(Edited)

1
Reply
0.2mm layer, 2 walls, 15% infill

nice and easy print

0
Reply
0.24mm layer, 3 walls, 15% infill

what sorcery is this?!? Great print!

0
Reply

Remixes (0)

There are no remixes yet