You will need

• Textured PEI Sheet: https://eu.store.bambulab.com/products/bambu-textured-pei-plate
• - LED Strip (with switch): https://s.click.aliexpress.com/e/_DFOBtHT

Optional, but recommended:

• Aluminum tape: https://s.click.aliexpress.com/e/_DEPgqHd
• - Glue gun or Tape

Assembly instructions

You can follow either of these two videos to assemble the lamp. It's very simple, you stick the LED strip inside and that's it. If you want, you can use aluminum tape to improve the lighting, although it is not necessary:

• Assembly instructions by braga3dprint: https://www.youtube.com/watch?v=QNsShLmXYh0 (He makes very beautiful designs, you can leave him a follow and help him grow his channel!)
• - Another assembly instructions: https://www.youtube.com/watch?v=nDUlBp7Mm1c----

Printing settings

Following recommendations, you can start with these settings in Bambu Studio:

• Preferences (CTRL + P) → Activate developer settings → Quality → Advanced → First Layer Flow Ratio: 1.04
• - Quality → Wall generator → Arachne
• - Quality → Wall transitioning threshold angle → 50 degrees
• - Strength → Advanced → Infill/wall overlap → 20%
• - Quality → Advanced → Avoid crossing walls
• - Increasing retraction / reducing temperature can help reducing wisps
• - Order color printing from lightest to darkest color