Vision LED riser

About

I love my Vision enclosure, however one point for me was that top was not really appealing and I found out that I am not satisfied with LED light which is used on Bambu.

So I designed slim LED riser that improves esthetics of Vision enclosure and adds ability to add LED light bar around all 4 sides.

Whom it is for?

Anyone with vision enclosure or anyone who wants P1P with LED riser + there is quite big area face plate which you can modify if you wish!

Vision Enclosure

Features

• P1P Vision upgrade - fully compatible
• Seal indent
• LED guide
• Locating features
• Face plant which can be customized - provided STEP file
• Mounted firmly with bolts
• microSD card accessible

Before and after?

see for yourself…

before

after

What will you need?

• PETG (you can go for ABS, ASA, PA, your call even PLA might work…) - 210g
• 4x M3x12mm bolts (you should have spared from you Vision build, but you can get some from here)
• 4x M3 nuts
• 4x washer (optional but recommended)
• LED strip (optional but recommended; you might need to solder) - link
• Foam strip (optional but recommended) - 10x1mm link
• Glue - I used 2 part epoxy

Printing

As usual I like to make easy to print designs without supports, but due to constrains I was not able to come up with design without supports so I decided to split the part and glue it after.

For this reason I also modeled locating pins and jigs to help with assembly.

Print is therefore easy and you should follow these rules:

• Use smooth PEI / High Temp plate - or anything to get nice smooth surface, I did not try with textured
• Clean your bed before print, I had 0 warping issues with PETG
• Let the print cool down so you do not damage parts or the plate
• Properly tune you material, no over-extrusion or pressure advance. Tolerances are quite tight for nice fit.

Assembly

Guide is attached as a file.