Pew Pew Madafakas Coaster

Copyright Claim

Pew Pew Madafakas Coaster

Boost
303
441
102
This model is created by Make My Sign
Make Your Model

Print Profile(3)

All
A1
X1 Carbon
P1S
P1P
X1
X1E

4 Color AMS 0.2mm layer, 2 walls, 100% infill
4 Color AMS 0.2mm layer, 2 walls, 100% infill
Designer
59 min
1 plate
4.9(45)

All printers - 0.2mm layer, 4 walls, 100% infill
All printers - 0.2mm layer, 4 walls, 100% infill
59 min
1 plate
4.9(22)

Writing closed white 0.2mm layer, 4 walls, 100% infill
Writing closed white 0.2mm layer, 4 walls, 100% infill
1.1 h
1 plate
5.0(17)

Boost
303
441
102
6
518
440
Released

Description

Funny PEW PEW MADAFAKAS Coaster

The coaster has an diameter of 100 mm and a height of 2 mm. It is printed image side down for a better surface finish.

 

If you have any requests for changes or ideas, just let me know.

 

Attention!!! I noticed in the other print profiles that weren't mine, that the print order is set incorrectly. It needs to be printed in black first, otherwise it won't print the eyes properly. Please keep this in mind before printing the coaster.

 

Checkout the PEW PEW MADAFAKAS Lightbox here on Makerworld!!!

Pew Pew Madafakas Lightbox by undi23 - MakerWorld

Comment & Rating (102)

Please fill in your opinion
(0/5000)

Nice model, thank you!
The designer has replied
2
Reply
Sehr cool 🙂Wenn du die Druckreihenfolge des Filament änderst. Also das der Drucker zuerst Schwarz druckt und dann die anderen Farben im ersten Layer, werden die Augen noch besser. In meinem Profil ist es so Voreingestellt. Trotzdem Danke für das Bild 🙂
0
Reply
Print Profile
4 Color AMS 0.2mm layer, 2 walls, 100% infill
No issues at all. Used PLA+ from Sunlu and normal PLA from Sunlu Maybe it would be more accurate with a 0.2mm Nozzle
The designer has replied
0
Reply
Thank you for your feedback. You could also set the line width of the first layer to 0.2 mm in the print settings with a 0.4 mm nozzle. However, this would not eliminate your problem with poor print bed adhesion and may even worsen it. If you want to achieve a better printing result, I would recommend cleaning the Textured PEI printing plate with dishwashing liquid and calibrating the flow value of your black filament. It looks like you have under-extrusion in the first layer, maybe increasing the filament temperature by 10 degrees would also help.
(Edited)
0
Reply
This is a cool design, and the coasters turned out great. I printed the first one (right) with a 0.4mm nozzle and the designer's print profile (which prints black first). The coaster on the left was printed with the designer's profile and a 0.2mm nozzle, but I also painted the small speckles in the letters (the small dots in the letters are part of the design, but I prefer the letters solid). I did not switch to the 0.2mm nozzle intentionally for this print though, my 0.4mm nozzle failed, so I had to switch it out while I wait for a spare 0.4mm. The 0.2mm nozzle does a better job of resolving some of the finer details, but the very small details like the white specks in the body of the cat still do not show up - so I think it's probably best to just use a 0.4mm nozzle and save half the printing time. I used a textured PEI sheet, which seems to be perfect for coasters. I can't seem to find a way to rate this model, so I will improvise: *****
(Edited)
1
Reply
Print Profile
4 Color AMS 0.2mm layer, 2 walls, 100% infill
ha ha, sehr lustig. Hab es auf 150% skaliert gedruckt, Komisch war erst nur, dass der untere rechte Abschnitt beim laden schwarz dargestellt wird. Dachte erst das sei ein Fehler in der Datei, aber nach dem slicen ist er dann aber rot wie es sein soll.
(Edited)
1
Reply
Print Profile
All printers - 0.2mm layer, 4 walls, 100% infill
Nice! Pew Pew!
1
Reply
Print Profile
Writing closed white 0.2mm layer, 4 walls, 100% infill
Best coaster 👍🏼
1
Reply
Print Profile
4 Color AMS 0.2mm layer, 2 walls, 100% infill
I love it! 🙂
0
Reply
Boosted
Print Profile
4 Color AMS 0.2mm layer, 2 walls, 100% infill
The coasters came out pretty good! I designed a holder for them as well.
0
Reply
Print Profile
4 Color AMS 0.2mm layer, 2 walls, 100% infill
Printed great, looking great
0
Reply
Print Profile
All printers - 0.2mm layer, 4 walls, 100% infill
The colors changed a little, but very cool! Thanks to the Maker!
(Edited)
0
Reply