可完全打开的桌下抽屉

Since there are obstacles under my desk and the drawer length is relatively short, common drawers cannot be fully opened and are inconvenient to use. I designed this drawer that can be fully opened.

There are 2 trays with a total of 5 parts that need to be printed.

Size:22.6x14x7.2cm

If you need other sizes, you can contact me。

由于我桌子下面有道支撑杆挡住，抽屉只能14cm长，普通的抽屉不能完全抽出或者会滑落，使用不方便，我设计了这个可以完全打开的抽屉。

尺寸：22.6x14x7.2cm

如果您需要其它尺寸可联系我。

Notes:

1、On the middle slide rail, there are two “Brim” , these “Brim” are cube with a height of one layer，and is very easy to tear off. I If you don’t need it, you can also split object in the software and delete them(or download file: mid.stl).

滑轨中间有两处接触面很小，为防止翘曲手机添加了两个裙边，是高度为1层的立方体，你如果不需要可以使用“拆分”菜单将这两个裙边删除，或者下载mid.stl打印。

2、The drawer box needs support，support type recommends using the manual method to add support surfaces instead of the auto method(this .3mf has already been setup), and strongly recommended to use specialized support filament as support interface.

盒体两边需要支撑，手动绘制需要支撑的面，不要自动（您下载的文件里已经设置好），建议使用专用的支持料做为支撑界面，会非常好拆

3、Once the drawer is assembled, install it under the table using double-sided tape（width：3cm）

将导轨安装好后，在两个上表面贴上双面胶带，宽度为3cm，使用下图这种胶带。建议像图片中这样捧着盒体粘贴到桌下，而不是拿着两侧滑轨，以防止使滑加轨间隙过小影响流畅