Ghostbusters: Hex Coaster

Ghostbusters: Hex Coaster

This coaster design is inspired by Ghostbusters, featuring three separate parts: the logo, a hex background, and the base. I designed it this way to minimize or even eliminate the need for color changes during printing. The separate base also allows you to experiment with different filament colors for a clean, contrasting outline.

Included Print Profiles:

• Combined Parts: Print all parts together.
• Separate Base (No AMS): Prints the hex background, logo and base separately.
  • Note: The red logo in this print profile has 2 small pieces and they need to be glued to the hex back. These 2 parts are quite small and I recommend using tweezers to place and glue them.

Dimensions: 100 x 100 x 4.2 mm

Recommended Print Settings:

• Layer Height: 0.2 mm
• Infill: 10%–20%
• Infill Pattern: Gyroid

Filaments Used:

• Bambu Basic PLA Jade White
• Bambu Basic PLA Red
• Bambu Basic PLA Black

Notes:

• The hex background piece fits snugly into the base without glue, so you can separate the pieces if you want. However, if you prefer a permanent finish, the hex piece can be glued into the base.
• Feel free to scale this model to any size you like — just be sure to scale all parts equally to keep them compatible.

Please do not sell. This is fan art and not licensed by Sony Pictures or Ghostbusters.