Never Lost, Always Found.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
- PLA Overture Black Matte Transmission Distance: 3
- PLA+ Sunlu Grey Transmission Distance: 2
- PLA META Sunlu Red Transmission Distance: 4
- PLA Overture Cream Transmission Distance: 3
- PLA Sunlu Beige Transmission Distance: 8
- PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
- Start with Black Matte
- At layer #12 (1.04mm) swap to Grey
- At layer #16 (1.36mm) swap to Red
- At layer #17 (1.44mm) swap to Cream
- At layer #18 (1.52mm) swap to Beige
- At layer #24 (2mm) swap to White for the rest.
Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.
*If you are using a single AMS, you can do more than 4 colour changes by swapping out a spool that has been completed printing with another, for as many times as you want.