Toothpick Dispenser - Print in Place - No Supports

Toothpick Dispenser - Print in Place - No Supports

Boost
906
1328
302
GIF
GIF

Print Profile(6)

All
A1
A1 mini
P1S
P1P
X1
X1 Carbon
X1E

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
3.6 h
1 plate
4.9(54)

Clean Version, 0.2mm layer, 2 walls, 15% infill
Clean Version, 0.2mm layer, 2 walls, 15% infill
Designer
3.6 h
1 plate
4.9(16)

0.2mm layer, 2 walls, 15% cross hatch infill
0.2mm layer, 2 walls, 15% cross hatch infill
2.8 h
1 plate
4.9(109)

Brim,0.2mm layer, 2 walls, 15% infill
Brim,0.2mm layer, 2 walls, 15% infill
2.9 h
1 plate
4.7(7)
Click to see more

Boost
906
1328
302
162
2.6 k
1.4 k
Released

Description

*** BREAKING NEWS ***

ATTENTION: 65 mm long toothpicks & 0.2 mm layer height is required for this version!

ACHTUNG: Für diese Version werden 65 mm lange Zahnstocher & 0,2 mm Schichthöhe benötigt!

*** *** *** *** *** ***

 

************ UPDATE ************

I'm still collecting suggestions for Version 3. Let me know in the comments if there's anything missing:

1.   65 to 68 mm toothpicks must fit
2.   Container for approx. 100 toothpicks
3.   Design without text and symbols

4.   Shouldn't look like a Chinese coffin, but more like a Porsche

********************************

 

I love mechanical "Print-In-Place" models. And sometimes I enjoy clicking or screwing things together after printing.

But why shouldn't my 3D printer handle that if it can do it much better than I can...

Inspired by various models and 3D printing techniques, I proudly present my latest creation. After numerous prototypes, your printer should be able to produce this toothpick dispenser without any post-processing or assembly.

 

I hope this little gadget brings you as much joy as it did for me while developing it.

 

PS: The version number is written inside. I look forward to your feedback and suggestions for improvement.

Updates will follow...

 

***********************

 

Mechanischer Zahnstocher Spender – Einteiler, keine Stützen, keine Montage, keine Nachbearbeitung.

 

Ich liebe mechanische «Print-In-Place» Modelle. Und manchmal mag ich es, wenn ich nach dem Druck etwas zusammen klicken oder schrauben kann.

Aber warum sollte das nicht mein 3D Drucker machen, wenn er das doch viel besser als ich kann…

Inspiriert von verschiedenen Modellen und 3D-Druck Techniken präsentiere ich nun meine neueste Kreation. Nach zahlreichen Prototypen sollte nun auch dein Drucker diesen Zahnstocher Spender ohne Nachbearbeitung und zusammen friemeln ausspucken.

 

Ich hoffe dieses kleine Gadget bereitet euch genau so viel Freude wie mir beim Entwickeln.

 

PS: Im Inneren ist die Versionsnummer angeschrieben. Ich freue mich auf euren Feedback und Verbesserungsvorschläge.

Updates werden folgen…

Comment & Rating (302)

Please fill in your opinion
(0/5000)

Boosted
really would like one without all the text/graphics, so a clean version would be very much appreciated
The designer has replied
100
Reply
If your comment gets enough likes, I will make it available.
9
Reply
Boosted
Replying to @GmD_1980 :
I don't know where the finish line is, but thank you for your model, it looks great and has the kind of features that so many people apparently are itching for. You know, that "3D printing magic" where people say "you can print THAT?!" 😁👍🏻 Edit: you know what, I have a boost here that's now yours 🚀
(Edited)
1
Reply
Replying to @smashd :
Thank you very much for your boost. And congratulations on reaching the finish line! So, you want to completely delete ALL text and graphics? Let's capture this clearly: 1. Remove "TOOTHPICK". 2. Remove "PUSH". 3. Remove the two “U-Grip lines” below “PUSH”. 4. Remove the three arrows above "PUSH". 5. Remove my designer logo “GmD” from inside the container 6. Remove the version number "V2.64". 7. Remove “Designed by GmD in Switzerland”. Oh man, points 5 and 7 make my heart bleed!
2
Reply
Boosted
Ein weiterer Zahnstocherhalter auf meinem Tisch. Die Bedienung, sowie die Leichtigkeit beim Drucken und der Verzicht auf Montage, kommen auf, wunderbar. Es ist mein Favorit geworden und steht in der Mitte des Tisches. Vielen Dank für diese wundervolle Arbeit. ------------------------------------------------------------------------ Otro palillero en mi mesa. El funcionamiento, así como la facilidad a la hora de imprimir y la ausencia de montaje, una maravilla. Ha pasado a ser mi favorito y es el que ocupa el centro de la mesa. Muchas gracias por este maravilloso trabajo.
(Edited)
The designer has replied
3
Reply
Vaya, gracias por este honor. Estoy muy satisfecho.
2
Reply
Print Profile
0.2mm layer, 2 walls, 15% cross hatch infill
You are No. 1
4
Reply
A genius design! Works and prints flawlessly.
4
Reply
Ciao complimenti per il tuo lavoro bell'oggetto stampa semplice risultato direi perfetto, purtroppo pero' ho notato che con un singolo stuzzica dente funziona benissimo mentre se nel contenitore inserisco piu' stuzzica denti il meccanismo si inceppa, mi sai dire se hai avuto lo stesso problema-?
The designer has replied
1
Reply
Yes, if the model still has filament threads due to printing, the toothpicks will not roll cleanly into the groove. Or if the toothpicks are not inserted properly, blockages can occur. However, if you clean the model thoroughly after printing, it should work more or less well. Sometimes the toothpicks are not well made and stick together.
1
Reply
Replying to @GmD_1980 :
ok ti ringrazio proverò
0
Reply
Awesome print thanks GmD!
The designer has replied
2
Reply
Always happy to create something awesome for you!
1
Reply
Hallo, leider lässt sich der Deckel nach dem Druck nicht bewegen. gibt es eine Möglichkeit mehr Spalt zu geben. Grüße Ralf
The designer has replied
1
Reply
Hallo Ralf, hast du mit deinem P1S und meinem Print Profile gearbeitet? ...da kann eigentlich nichts schief gehen! Bitte stell mal ein Bild von deinem Print hier rein, Danke!
1
Reply
Bei einer Schichthöhe von 0,3 mm kann ich das verstehen!
1
Reply
Replying to @GmD_1980 :
Ich habe einen P1S und habe mit Deinen Einstellungen gedruckt Cross Hatch Infill Layerhöhe 0,2 beim versuch den Deckel zu verschieben ist das Teil gebrochen. Grüße Ralf
1
Reply
Very perfect design. But there seems to be a small problem. If my toothpicks are a little thinner, as long as more than 2 toothpicks are stored in them, they will be squeezed into the slot and unable to come out. Also, no offense intended, I originally wanted to give this to my elders, but was told it looked like a Chinese coffin.
3
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
This is such a fun print and works amazingly well. Printed beautifully in bambu marble white pla.
1
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% cross hatch infill
cool!
1
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.