RJ45 Ethernet Dust Cover Plug
Copyright Claim
RJ45 Ethernet Dust Cover Plug
Boost
32
73
16
Print Profile(3)
(tight) 0.2mm layer, 3 walls, 10% infill
Designer
26 min
1 plate
(loose) 0.2mm layer, 3 walls, 15% infill
Designer
32 min
1 plate
Resized for better fit
25 min
1 plate
Open in Bambu Studio
Boost
32
73
16
1
116
106
Released
Description
This is a simple RJ45 ethernet cover plug. It's designed to be easily printed.
There are two STLs. The standard one (loose) is dimensionally accurate. It also has a flat bottom surface that is painted to have a basic connection image if you want multi-color prints. Use this model if you plan on printing in standard rigid material like PLA or ABS. The other model (tight) is oversized, with a bas-relief of the connection image. This model is oversized because it is designed to be printed with TPU; which has slight shrinkage, and you want it tighter to act as a gasket.
If you appreciate my models, please consider buying me a coffee!
Comment & Rating (16)
All
Print Profile
(loose) 0.2mm layer, 3 walls, 15% infill
Pressure is good, but are too big
(Edited)
0
Reply
Print Profile
(loose) 0.2mm layer, 3 walls, 15% infill
printed very nice but tolerances are just a little off
0
Reply
Print Profile
(tight) 0.2mm layer, 3 walls, 10% infill
printed very nice but tolerances are just a little off
(Edited)
0
Reply
Print Profile
(loose) 0.2mm layer, 3 walls, 15% infill
Too tight. Even the loose profile. Had to shrink
0
Reply
I printed the“loose” model. They were too large to fit into standard RJ45 ports. Recommend you avoid this print until fixed by the designer.
0
Reply
Print Profile
(tight) 0.2mm layer, 3 walls, 10% infill
Printed the tight version with TPU. Perfect! Thanks!
(Edited)0
Reply
Print Profile
(loose) 0.2mm layer, 3 walls, 15% infill
all good
0
Reply
Print Profile
(loose) 0.2mm layer, 3 walls, 15% infill
Other Issues:passen nicht genau in die ports
The designer has replied
0
Reply
What do you mean?
0
Reply
Print Profile
Resized for better fit
0
Reply
Print Profile
Resized for better fit
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
© 2024 MakerWorld