Detroit Red Wings - NHL Hueforge
The rest of my NHL Hueforges can be found in this collection here:
https://makerworld.com/@CanadianGamer/collections/549654
If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position
My Frame is a friction Fit design here for 200x200 Hueforges
https://makerworld.com/en/models/381229#profileId-281475
And if you scale it down, I have frames for 100x100 or 150x150 here:
https://makerworld.com/en/models/173529#profileId-190705
Please post a picture of your printed copy! I'd love to see it!
— Printing Instructions--
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Sunlu Black Transmission Distance: 10
PLA Overture Red Transmission Distance: 5
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA Overture White Transmission Distance: 3
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #16 (1.36mm) swap to Silver
At layer #23 (1.92mm) swap to White for the rest.