Wine bottle stand in a shape of a dragon wrapping around it. Includes two versions - with wings for larger printers and without wings for a little smaller printers. Designs are tested with wine bottles of up to 750ml glass bottles. Both designs are printable without any supports and are single piece - no gluing together required!
SETTINGS FOR MODEL WITH WINGS:
NO SUPPORTS REQUIRED
Print Dimensions: Height = 7.51 inches (19.1 cm) | Base size = 8.82 inches * 6.06 inches (22.4 cm * 15.4 cm)
Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 6 hours and 58 Minutes
Amount of material required: ~54.5m
SETTINGS FOR MODEL WITHOUT WINGS:
NO SUPPORTS REQUIRED
Print Dimensions: Height = 7.51 inches (19.1 cm) | Base size = 7.60 inches * 5.67 inches (19.3 cm * 14.4 cm)
Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 6 hours and 21 Minutes
Amount of material required: ~49.5m
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.