BAMBU LAB P1S PURGE CHUTE COVER WITH SILICON NOZZLE WIPER by Engineering Projects

Engineering Projects

3D Printer>3D Printer Accessories

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

STANDARD

Designer

23 min

1 plate

4.5(33)

Open in Bambu Studio

Boost

140

276

160

Released

Description

NOTICE: REMIX ARE NOT ALLOWED

NOTICE: DO NOT POST ANY OF YOUR PROFILE

I design this a purge chute cover with a silicon nozzle wiper.

Benefits:

Purged filament doesn't jump on the plate
Nozzle is better cleaned
Pieces of purged filament don't go everywhere , each corner of the printer remains clean

How to install:

How it works:

INSTRUCTIONS

What is the nozzle wiper made of?

It is made from a piece of silicone from the molds used to make pancakes. Like this one you see in this pic:

How big should the silicone piece to be cut be?

10mm x 2mm x 15mm

PRINT THE POOP STOP WITH THE NOZZLE WIPER

CUT THE PIECE:

APPLY THE SILICON PIECE IN THE SEAT OF THE POOP STOP AND INSTALL THE POOP STOP IN THE POOP BUCKET

AS YOU SEE IN THIS PIC , MY MODEL IS SUPER FLAT, SO WARPING MUST BE ON IT TO AVOID CRASHED OR SCRATCHES AGAINST THE HOTEND, TOOLHEAD OR FAN DUCT:

BE SURE WHEN YOU'RE PRINTING , THE PRINT IS NOT WARPING!!

With what materials should it be printed?

I recommend PAHT-CF and PET-CF. This is because, when the printer is performing the "nozzle cleaning tip" function, the nozzle temperature is 200°C.
So I recommend printing it with materials that resist high temperatures to avoid deformation or future problems.

Do you want to use ABS? Ok, you're free to do so, but don't give me a bad rating for YOUR CHOICE!

I have tested this model so many times and it works smoothly! No issue.

ALL THE MODELS ARE AVAILABLE ON MY PAGE.

NOTICE:

DON'T MODIFY THE ORIENTATION!

NOTICE: THE FOLLOWING PHOTO SHOWS THE EXTRUDED FILAMENT BEING HELD ON THE SILICON NOZZLE WIPER, BEFORE PRINTING.

THIS IS ONE OF THE MAIN REASONS WHY I DESIGNED THIS MODEL. THAT EXTRUDED FILAMENT COULD RUIN YOU FIRST LAYER!

PLEASE CHECK ALWAYS IF THE SILICON NOZZLE WIPER IS CLEAN AND IF YOU SEE THAT SOME EXTRUDED FILAMENT HAS BEEN DEPOSITED ON IT, REMOVE THE EXTRUDED FILAMENT AND ENJOY 3D PRINTING.

THE PHOTO WAS MADE AS EXAMPLE AFTER 3h PRINTING.

MY MODEL HAS ALREADY BEEN TESTED, FOR A MONTH AND I DON'T FIND ANY PROBLEMS.

THE MODEL ,AS TEST EXAMPLE IN THE PIC, WAS PRINTED IN ABS, BUT I STILL RECOMMEND SUPERIOR FILAMENTS LIKE PC , PATH OR PET.

𝙽𝙾𝚃𝙸𝙲𝙴:

𝚃𝙷𝙸𝚂 𝙸𝚂 𝙰 𝚂𝙸𝙼𝙿𝙻𝙴 𝙿𝚁𝙸𝙽𝚃. 𝙰𝚂 𝚈𝙾𝚄 𝚂𝙴𝙴 𝙸𝙽 𝚃𝙷𝙴 𝙿𝙸𝙲𝚃𝚄𝚁𝙴𝚂 , 𝙼𝚈 𝙼𝙾𝙳𝙴𝙻 𝚂𝚃𝙸𝙲𝙺 𝚅𝙴𝚁𝚈 𝙶𝙾𝙾𝙳 𝙾𝙽 𝚃𝙷𝙴 𝙱𝙴𝙳. 𝚂𝙾 𝙱𝙴𝙵𝙾𝚁𝙴 𝚈𝙾𝚄 𝙶𝙸𝚅𝙴 𝙱𝙰𝙳 𝚁𝙰𝚃𝙸𝙽𝙶 𝚃𝙾 𝙼𝚈 𝙿𝚁𝙾𝙵𝙸𝙻𝙴𝚂, 𝙱𝙴 𝚂𝚄𝚁𝙴 𝚈𝙾𝚄 𝙷𝙰𝚅𝙴 𝙰 𝙶𝙾𝙾𝙳 𝙱𝙴𝙳 𝙰𝙳𝙷𝙴𝚂𝙸𝙾𝙽 𝙰𝙽𝙳 𝙰𝚂𝙺 𝚃𝙾 𝚈𝙾𝚄𝚁𝚂𝙴𝙻𝙵 , 𝚆𝙷𝚈 𝚈𝙾𝚄 𝙳𝙾𝙽'𝚃 𝙷𝙰𝚅𝙴 𝙰 𝙶𝙾𝙾𝙳 𝙱𝙴𝙳 𝙰𝙳𝙷𝙴𝚂𝙸𝙾𝙽. 𝙸 𝙳𝙾𝙽'𝚃 𝚆𝙰𝙽𝚃 𝚃𝙾 𝚄𝙿𝙻𝙾𝙰𝙳 𝙰 𝙻𝙾𝚃 𝙾𝙵 𝙿𝚁𝙾𝙵𝙸𝙻𝙴𝚂 𝙵𝙾𝚁 𝙴𝙰𝙲𝙷 𝚂𝙸𝙽𝙶𝙻𝙴 𝙿𝚁𝙾𝙱𝙻𝙴𝙼 𝚈𝙾𝚄 𝙷𝙰𝚅𝙴 𝙰𝙽𝙳 𝙵𝙾𝚁 𝙴𝚅𝙴𝚁𝚈 𝚂𝙸𝙽𝙶𝙻𝙴 𝙼𝙾𝙳𝙴𝙻! 𝙴𝚅𝙴𝙽 𝚈𝙾𝚄 𝚆𝙰𝙽𝚃 𝚃𝙾 𝚂𝙷𝙰𝚁𝙴 𝙾𝙽𝙴 , 𝙸𝚃 𝙳𝙾𝙴𝚂𝙽'𝚃 𝙼𝙰𝙺𝙴 𝚂𝙴𝙽𝚂𝙴 𝙵𝙾𝚁 𝚃𝙷𝙴 𝚂𝙸𝙼𝙿𝙻𝙴 𝙼𝙾𝙳𝙴𝙻 𝙸𝚃𝚂𝙴𝙻𝙵!

𝙿𝙻𝙴𝙰𝚂𝙴, 𝙻𝙸𝙺𝙴 𝙸 𝚂𝙰𝙸𝙳 𝚃𝙷𝙴 𝙼𝙾𝙳𝙴𝙻 𝚂𝚃𝙸𝙲𝙺𝚂 𝙾𝙽 𝚃𝙷𝙴 𝙱𝙴𝙳 𝙴𝙰𝚂𝚈! 𝙽𝙾𝚃 𝙰𝙻𝚆𝙰𝚈𝚂 𝚁𝙴𝙳𝚄𝙲𝙸𝙽𝙶 𝚃𝙷𝙴 𝚂𝙿𝙴𝙴𝙳 𝙲𝙰𝙽 𝙷𝙴𝙻𝙿 𝚈𝙾𝚄 𝚃𝙾 𝚂𝚃𝙸𝙲𝙺 𝙴𝚅𝙴𝚁𝚈 𝙼𝙾𝙳𝙴𝙻 𝙾𝙽 𝚃𝙷𝙴 𝙿𝙻𝙰𝚃𝙴! 𝚃𝙷𝙰𝙽𝙺 𝚈𝙾𝚄 𝙵𝙾𝚁 𝚃𝙷𝙴 𝚄𝙽𝙳𝙴𝚁𝚂𝚃𝙰𝙽𝙳𝙸𝙽𝙶!

ᴵᶠ ʸᵒᵘ ʰᵃᵛᵉ ᵖʳᵒᵇˡᵉᵐˢ ᵃᵇᵒᵘᵗ ᵗʰᶦˢ ᵐᵒᵈᵉˡ, ʲᵘˢᵗ ˢᵉⁿᵈ ᵐᵉ ᵃ ᵖʳᶦᵛᵃᵗᵉ ᵐᵉˢˢᵃᵍᵉ ᵃⁿᵈ ᴵ'ˡˡ ʰᵉˡᵖ ʸᵒᵘ.

ᴳᶦᵛᵉ ᵐᵉ ᵃ ˡᶦᵏᵉ ᵃⁿᵈ ᶠᵒˡˡᵒʷ ᵐʸ ᵖᵃᵍᵉ.

ᵀʰᵃⁿᵏ ʸᵒᵘ ᵗᵒ ˢᵘᵖᵖᵒʳᵗ ᵐᵉ ᵃⁿᵈ ʰᵃᵖᵖʸ ᵖʳᶦⁿᵗᶦⁿᵍ.

Comment & Rating (48)

@dariusdd2006

Print Profile

STANDARD

There were two strange things with the predefined profile: first, that it was prepared for ABS while the instructions explicitly recommended PETG second, for some reason support blockers were not enabled for the letters since I used clear PETG the writing is still frosty visible, but it is not the intended result there's no chance in hell to remove those with such a small gap it otherwise functions and fits as intended on my P1S

The designer has replied

@EngineeringProj

There aren't strange things because you just started 3D PRINTING. So lemme answer you: 1 I WROTE I RECOMMEND PET-CF AND PAHT-CF. 2 profile is set up with ABS , because most WANT prints IN ABS 3 SUPPORT BLOCKERS? WHAT'S THAT? SO JUST IN CASE ,support are ON! 4 you are new in this world and you need the right tools , WHAT ABOUT BUYING TWEEZERS FOR EXAMPLE TO REMOVE SUPPORTS? 5 BASICALLY YOU WANT TO PRINT IN CLEAR PETG AND ITS' FROSTY BECAUSE YOU DON'T KNOW HOW TO PRINT CLEAR PETG

(Edited)

@EngineeringProj

6 IF YOU DON'T LIKE MY MODEL , CLICK "DOWLOAD" FUSION360 , BUILD YOUR OWN ONE! 7 SINCE YOU DON'T KNOW HOW TO PRINT , LEMME GIVE YOU THE FIRST ADVICE, LIKE GO ON THE BAMBU LAB WIKI AND LEARN HOW TO PRINT CLEAR PETG AND OTHER FILAMENTS. HERE THE LINK: https://wiki.bambulab.com/en/knowledge-sharing/transparent-petg 8 I report you for misinformation! As you read in the link "KNOWLEDGE SHARING" DUDE! KNOWLEDGE! HAVE A NICE DAY!

(Edited)

@PoussinJaune

Replying to @EngineeringProj :

Wow what a a** ****, i was tinking you were probably like that when i saw remix off and notice that say ``do not post print profile`` you have THE perfect print profile and model huh? It was not well made to be print, the P1S logo is not on the build plate so you have to print with support but it doesn't look good even with YOUR profile and we can see even on the one you printed yourself it dosen't look good. You will say it look better the logo not flush but no. You can't say someone is bad at 3d printing because the model were not good to be printed with all filament. A good model should be printable with ALL filament. I made and posted one that don't need support it was EASY 🤣 You reported it because he give you 4 star and you say it's because he is not good at 3dprinting not because of your profile WT*?? HE USE YOUR PRINT PROFILE! Now report me. It will probably backfire

(Edited)

@user_2925160602

Print Profile

STANDARD

Came out awesome. did change the orientation with support as I wanted a smooth top finish to show the P1S better. cleans the tip very well.

The designer has replied

@EngineeringProj

Wow , love it! Thank you!

(Edited)

@PoussinJaune

Print Profile

STANDARD

Support Issue:Should not need support. I made a version that doesn't need support.

@PoussinJaune

Replying to @EngineeringProj :

Support was ON I use your print profile but its bad and the model its not well made was possible to make a model that don't need support I made one. We can see even on your print that where there was support there is like strings.

(Edited)

@SS_Stivi

Print Profile

STANDARD

Printed ok with petg

@adooley1684

Print Profile

STANDARD

Can't wait to see it in action once I'm up and running again. Printed great in PETG. Glad someone devised a solution to the stuck filament issue!

@NxtGnPrtHub

Print Profile

STANDARD

https://forum.bambulab.com/t/is-it-allowed-to-restrict-profiles-on-a-model/56809

(Edited)

@daveholland86

Print Profile

STANDARD

The designer has replied

@EngineeringProj

Thank you!

@daveholland86

i had trouble sourcing the silicone wiper, so I made a jig where you can fit any piece to the perfect size including the 2mm depth, I will upload and tag yours soon.

(Edited)

@daveholland86

Replying to @EngineeringProj :

https://makerworld.com/models/164762

@docisven

Print Profile

STANDARD

einwandfrei. komisch dass mein P1S das so gut in PETG gedruckt hat obwohl ich mit dem Filament noch nie einen vernünftigen Druck mit dem Bambu Slicer hinbekommen habe.

The designer has replied

@EngineeringProj

Servus, danke dir!

@BuildMyDream

good

The designer has replied

@EngineeringProj

Thank you!

@maxsterr

Print Profile

STANDARD

No issues printing this. came out great

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.