AMS Lite PTFE Guide by alxvtoronto

alxvtoronto

3D Printer>3D Printer Accessories

Print Profile(3)

All

0.2mm layer, 2 walls, 15% infill

Designer

47 min

1 plate

4.6(8)

0.2mm layer, 2 walls, 20% infill

Designer

1.2 h

2 plates

5.0(1)

0.2mm layer, 2 walls, 20% infill

Designer

2 h

3 plates

Boost

Released

Description

AMS Lite guide for the PTFE tubes. This was created to keep the PTFE tubes from dangling while printing when the AMS Lite is being top mounted on the A1. Bambu Labs originally included some guides as part of the top mount models but I didn't find them as useful.

Comment & Rating (14)

@ondrovic

any chance you could release a version for those of us who have the ams mounted on the wall? Provide pic for orientation Would need to swatch the numbers and rotate them

The designer has replied

@alxvtoronto

yea, I initially had a version for a vertical position I’ll tweak it and release it as a new profile

@ondrovic

Replying to @alxvtoronto :

awesome thanks

@alxvtoronto

Replying to @ondrovic :

I've added a new profile for a vertical guide, might not be exactly what you were expecting but you can basically use it without the 4 guide mounts and just have them all bundle in a center vertical guide I've created.

@alocer

Print Profile

0.2mm layer, 2 walls, 15% infill

had to cut a part because of my AMS lite setup, nothing about the model. Easy and fast print. thanks!

(Edited)

@user_3400210392

Print Profile

0.2mm layer, 2 walls, 15% infill

@stircwazy

Print Profile

0.2mm layer, 2 walls, 15% infill

The print came out great and the model fits, and works, perfectly.

(Edited)

The designer has replied

@alxvtoronto

Thank you I’m glad you find it useful as well

@Synthy87

Print Profile

0.2mm layer, 2 walls, 15% infill

It´s simply clever and smart design!!!

@jjvelar

Print Profile

0.2mm layer, 2 walls, 15% infill

useful to keep the tubes straight. easy print

@Dakaru

Print Profile

0.2mm layer, 2 walls, 20% infill

@Dakaru

Print Profile

0.2mm layer, 2 walls, 15% infill

@starke

Print Profile

0.2mm layer, 2 walls, 15% infill

Other Issues:Actually, the PTFE hoses are relieved better than with the printed parts from Bambu, but you should be very careful with high printed parts or if you have a fastening like this rubber part around the tubes to hold them together, because these parts can get stuck on the ring of this part and I don't want to imagine what happens then. I printed two of the parts without the ring to be on the safe side as the tubes were quite kinked once after a print.