Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 3.7
PLA PolyTerra Muted Green Transmission Distance: 0
PLA Protopasta White Transmission Distance: 5
PLA Gray Transmission Distance: 2.5

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #9 (0.8mm) swap to Red
At layer #10 (0.88mm) swap to Muted Green
At layer #12 (1.04mm) swap to White
At layer #13 (1.12mm) swap to Gray
At layer #16 (1.36mm) swap to Gray for the rest.