Nintendo Switch Dock Cover Pikachu by angry-p1p

angry-p1p

Tools>Gadgets

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.5 h

2 plates

5.0(23)

Open in Bambu Studio

Boost

133

149

136

Released

Description

Have fun with this Nintendo Switch Dock Cover. This cover is for the “normal” Switch Dock, I don't know if the OLED-Dock is different.

If your printer and filament is dialed in it should slide right over your dock.

To ensure you waste as little filament and time as possible I added a small test piece on a second plate. If needed adjust/scale it by a tiny amount according to your tolerances or filament.

All my prints use Sunlu PLA +.
A first layer and first layer infill speed of 25mm/s, only one wall on first layer and a first layer line width of 0.25mm at a nozzle size of 0.2mm.

See my other designs:

0.4mm Nozzle

0.2mm Nozzle

Comment & Rating (26)

@Bedrock

Print Profile

0.2mm layer, 2 walls, 15% infill

turned out awesome i like it better with reversed colors, my little cousin is gonna love it

@Salala

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

realy like this model and printed great. but dont fit on my Switch Oled Dock. maybe i scale it up and try it again. thx for this grate model!

@TheTaxMan

Print Profile

0.2mm layer, 2 walls, 15% infill

printed it in white instead of yellow and it looks good as hell

@Robbedrobo60

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Fits perfectly and plan's on doing other pokemon

@Little_Impact

Print Profile

0.2mm layer, 2 walls, 15% infill

X +2mm (176,..mm > 178,..mm) in Bambu Studio dann passt es auf die Oled Switch

(Edited)

@AGang3DAdventur

Print Profile

0.2mm layer, 2 walls, 15% infill

printed perfectly! I used my own settings for light boxes and it’s amazing!

@rachele819

Came out great and fit my son's Switch perfectly! printing Charmander now. Do you have plans for any other Pokemon covers??

@dresende

Print Profile

0.2mm layer, 2 walls, 15% infill

@unky

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_3317560281

Print Profile

0.2mm layer, 2 walls, 15% infill

Very neat and detailed print

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.