P&O Cruises Ventura 1:1000 Multi Colour No Supports
P&O Cruises Ventura 1:1000 Multi Colour No Supports
Print Profile(1)
Description
Scaled down and simplified version of my earlier multi plate 1:500 model, to allow it to print without supports on a single build plate.
Uses 10 colours - so really required 3xAMS's - however it would probably be possible to compromise colours down to 8.
Printing time is around 22 hrs.
Models pictured where printed in Bambu Lab PLA, with filament sponsored by Bambu Lab.
Background details on the original design are in this video. https://youtu.be/5GevDdOS9MU?si=JFMKeY5SKNVLE4ce
Timelapse of print here https://youtu.be/e5oiUcCPgx8?si=FMX4mRpZ9--Mw6yv
NB/ I printed the model on the cool plate and paused it few a few hours - plus forgot to turn the light back on for a while - hence the dark part of the timelapse.
Printing instructions:
- Print model without support
- If required manually remove some of the extra supports included in the model in order to allow it to print without slicer supports - the most prominent of which is the support under the bar at the rear and in the middle of the radar tower at the front. NB/ The supports under the bridge at the front are part of the real ship - so do not need to be removed.
Note that as this model is 99% based on the multipart/multi deck 1:500 design it does contain a fair bit of internal structure and text labelling etc which is really not needed in this single print version.
NB/ Test model as pictured had some slight colour bleeding between yellow and white due to default flushing volumes being selected - so the published 3mf has been alterted to auto calculate the flushing volumes - which has nearly doubled the yellow→Flushing volume, which should sort out the issue - at the expense of nearly an hours extra print time.
A 1:500 version of this same ship is also available, plus a single colour version. Various other P&O Cruise ship models available too.
This is a personal project. I have no connection to P&O Cruises or Carnival Corporation other than being a customer.
Model hosted exclusively on Makerworld until Dec 2023.
This version is released under a CC Non Commercial No Derivatives license due the P&O Cruises branding.
Comment & Rating (3)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
