19" Rack mount helper third hand tool
Copyright Claim
19" Rack mount helper third hand tool
Boost
28
74
5
Print Profile(2)
ABS, 0.2mm layer, 4 walls, 15% infill, no support
Designer
1.7 h
1 plate
PLA adaptive layers, custom walls, 15-25% infill
2.3 h
1 plate
Open in Bambu Studio
Boost
28
74
5
5
63
39
Released
Description
This little tool is designed to temporary hold 19" network components, which makes their installation easier.
Just clamp it to the rack and use it as a “third hand”.
In case the clamping force isn't high enough for your equipment, you can optionally add a M6 screw from the front.
BOM
- M6x50 screw and M6 nut for main screw
- M6x30 screw and M6 nut for optional front screw
- also optional 3* 6x3mm Magnets for stowing the tool on metal surfaces
The second M6 nut and the magnets need to be inserted mid print.
Don't use the print profile, if you would like to use these features,
as you will need to add pauses to the print to insert them.
No supported needed, when orientated as on the last picture.
Also see my other network equipment:
Comment & Rating (5)
All
Boosted
Print Profile
ABS, 0.2mm layer, 4 walls, 15% infill, no support
Super handy, simple to print and use. No support, straight forward. Works very well in PLA aswell. Tried them both and maybe UPS weights would need the ABS one, but servers with PLA, no problemo.
1
Reply
Hello @chrisax212 , should the nut add at layer 172 and the magnets at 369, is this correct?
The designer has replied
0
Reply
Hey, with 0.2mm layer height you should only have 215 layers. Add a pause at 213 for the magnets and at65 for the nut. See last picture for optimal build plate oriantation.
(Edited)0
Reply
Print Profile
ABS, 0.2mm layer, 4 walls, 15% infill, no support
0
Reply
Print Profile
PLA adaptive layers, custom walls, 15-25% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld