printchallenge

cover

plate_1.png

thumb_mars_rover.png

<p>I printed everything in PLA, standard settings. For small parts like axles I use brims. I personally also use brims on the wheels and rocker boogie parts, but that might not be needed.</p><p>&nbsp;</p><p>be carefull when assembling, some snaps are fragile!</p>

0.2mm layer, 2 walls, 15% infill

plate_2.png

plate_3.png

R.evolution801

PXL_20231114_200450237.webp

thumb_mars_rover.webp

PXL_20231114_200437118.webp

plate_1.webp

plate_2.webp

plate_3.webp

<p>This profile uses 4 colors through the AMS. The parts are split into 3 plates to minimize color switching. Use .2mm for a quicker print. I used .12mm as I didn't mind the extra time and it turned out looking really good.</p>

4 Color AMS, 0.12mm layer, 2 walls, 15%

Xilow3D

IMG_046465.jpg

<p>3 Colors </p><p>NO AMS </p><p>3 Plates</p><p>0.2mm layer, 2 walls, 15% infill</p>

3 Colors No AMS 0.2mm layer, 2 walls, 15% infill

<p>Print all files. I added different groups so they can be printed in different colors. </p><p>For assembly instructions please watch this short:</p><p>&nbsp;</p><figure class="media"><div data-oembed-url="https://youtube.com/shorts/J7GMYzbBtdc?feature=share"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=J7GMYzbBtdc">                        <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;">                          <iframe src="https://www.youtube.com/embed/J7GMYzbBtdc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe>                        </div>                      </div></div></figure>

Mini Mars Rover

ASIA

Print Profile(3)

Description

Comment & Rating (67)

License

Related Models