R2D2 - Hueforge
Copyright Claim
R2D2 - Hueforge
Boost
52
88
7
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
5.7 h
1 plate
Open in Bambu Studio
Boost
52
88
7
0
92
28
Released
Description
Remember if you sant to scale, do it only with x and y axis, z must be the same as original.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Marine Blue
At layer #12 (1.04mm) swap to Silver
At layer #18 (1.52mm) swap to Jade White for the rest.
Comment & Rating (7)
All
Print Profile
0.08mm layer, 1 walls, 100% infill
Great photo will definitely make it on my was
1
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
Thanks!
1
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
1
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
1
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
great hueforge
1
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
1
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
1
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld