Bambu Lab AMS Cardboard Spool Adapter Ring
Remixed by
Copyright Claim
Bambu Lab AMS Cardboard Spool Adapter Ring
Remixed by
Boost
50
87
15
Print Profile(1)
![1 size <--> 1 plate, [28 - 37], 0.16mm layer, 3 walls, 10% infill](https://makerworld.bblmw.com/makerworld/model/USa946162435a63a/design/2023-12-01_449b339c20e9e.jpg?image_process=resize,w_100/format,webp)
1 size <--> 1 plate, [28 - 37], 0.16mm layer, 3 walls, 10% infill
5.3 h
10 plates
Boost
50
87
15
0
173
198
Released
Description
Took a great model and just added a little lip on the inner side so that it wouldn't slip. Some of my Overture rolls have slightly smaller diameters than others.
Some of the cardboard is also a bit thicker than others, so I made them in varying thicknesses from 2.8mm to 3.7mm. 3.4mm is what I use for my Overture rolls.
Printed with PETG at 0.2mm layer height. I use the stock PETG profile with decreasing perimeters to 50 mm/s to get a better surface finish.
Comment & Rating (15)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed fine, but had layer adhesion issues and broke when removing from plate.
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed nice with minimal material used. Seems sturdy. Thanks!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Great print
0
Reply
Fit nice and snug on a roll of overture PLA!
0
Reply
excellent!
0
Reply
cute work
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Did unfortunately not fit in the AMS.
0
Reply
Prints Fine. I like choices for the sizes
0
Reply
Print Profile
1 size <--> 1 plate, [28 - 37], 0.16mm layer, 3 walls, 10% infill
The designer has replied
0
Reply
Thanks for reviewing, I appreciate the feedback!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld