Yi Camera Mount - A1 Remixed by 3D.p3Dro

Remixed by

3D.p3Dro

3D Printer>3D Printer Accessories

Print Profile(1)

All

0.2mm layer, 3 walls, 15% infill

Designer

41 min

1 plate

4.3(6)

Open in Bambu Studio

Boost

Released

Description

This is a remix for Yi Cam A1.

I search but only have to A1 mini, and a make changes to fit on A1.

Comment & Rating (15)

@otello975

Print Profile

0.2mm layer, 3 walls, 15% infill

bel lavoro!

The designer has replied

@3D.p3Dro

Grazie mille

@adcdesign

Print Profile

0.2mm layer, 3 walls, 15% infill

Great remixe from the A1 mini one. The single little thing to improve : a fixation system under the bambulab motor unit because the cam fixation plate wants to pop out.

The designer has replied

@3D.p3Dro

Ok, I can try make change but until now my camera still fix after much printers😉 Thanks for your feedback😉

@jars99

The camera holder and mount printed perfectly - the long piece that holds it on is only touching the build plate on a tiny part in the print profile, and just printed as spaghetti. I rotated it 90 degrees so its on it's side, then it printed perfectly.

(Edited)

The designer has replied

@3D.p3Dro

Thanks ;)

@Dr4cula74

Boosted

Beautiful!!! work

The designer has replied

@3D.p3Dro

Thanks ;)

@Dr4cula74

Boosted

Replying to @3D.p3Dro :

🙏🙏🙏🙏🙏🙏

@Munark

Print Profile

0.2mm layer, 3 walls, 15% infill

works great.

The designer has replied

@3D.p3Dro

Thanks ;-)

@quadbears

Print Profile

0.2mm layer, 3 walls, 15% infill

not...awful. I had to shave quite a bit off the circle to make the camera fit. also had to use double sided tape seeing as the holder piece didn't print correctly. oh well.

The designer has replied

@3D.p3Dro

I don't know what your problems, nobody talk about your problems and i have two A1 and works very well!!